Reconfigure PSC from embedded to External

Re-configure PSC from Embedded to External

This article will guide you steps to, Reconfigure PSC from embedded to External. To achieve this, first of all you need to install new PSC (it could be windows based or appliance based) in same SSO domain.

Scenario – VMware vCenter 6.0 U3D is setup with embedded PSC.

Go to Cd-rom –> open vcsa-setup.html and choose install

Provide the required information. You can give vcenter name or ESXi name on which this PSC needs to be deployed.

Select the cluster where PSC needs to be deployed

Give the name of PSC and setup the password

 

Select the existing  SSO Domain name.

Most important – Similarly you can verify SSO site name and domain by below method , if you have multiple SSO site and domains then this steps will help you to cross check correct SSO site.

For VCSA appliance

/usr/lib/vmware-vmafd/bin/vmafd-cli get-domain-name –server-name localhost

/usr/lib/vmware-vmafd/bin/vmafd-cli get-site-name –server-name localhost

Please refer David blog’s for more info SSO Site Name and Domain check

For windows embedded PSC

C:\ProgramData\VMware\vCenterServer\cfg\install-defaults\vmdir.domain-name

“C:\Program Files\VMware\vCenter Server\vmafdd\vmafd-cli.exe” get-ls-location –server-name localhost

Note – Installation path might very based on your environment setup

Please refer William Lam Blogs for More info SSO Site Name and Domain check

Select existing SSO Site name

 

Select the datastore where PSC  needs to be deployed

Enter the appropriate network settings and click finish to start installation.

Please go to the below path

“vcenter installation directory\bin” folder and run below command to see PSC replication partner

vdcrepadmin.exe -f showservers -h localhost -u administrator -w “password”

Note – User should be SSO user.

Here you can see, new PSC is configured as partner with embedded PSC now.

Lets cross check if replication is happening between Embedded PSC and new PSC or not.

 

Step-3 Now we come to the most important steps, to reconfigure PSC from embedded to external

Go to below path

“vcenter installation directory\bin” and run below command

cmsso-util reconfigure –repoint-psc “New PSC FQDN or IP” –username administrator -passwd “password” -domain-name “sso domain name”

Lets verify if new vcenter is pointing to new PSC or not.

Go to advanced setting of vcenter server

Under config.vpxd.sso.sts.uri  — you will see new PSC name

Or go to below path to verify

        VCSA:

         /usr/lib/vmware-vmafd/bin/vmafd-cli get-ls-location –server-name localhost

        Windows VC:

        C:\Program Files\VMware\vCenter Server\vmafdd\vmafd-cli get-ls-location –server-name localhost

       Hope this helps, feel free to comment  🙂